LINDBERG HIGH-TEMP BELT FURNACE





LINDBERG 930-A12-B7-D1-FP Belt Brazing Furnace

LINDBERG 830A12B7D1FP BELT FURNACE LINDBERG 830A12B7D1FP BELT FURNACE LINDBERG 830A12B7D1FP BELT FURNACE LINDBERG 830A12B7D1FP BELT FURNACE LINDBERG 830A12B7D1FP BELT FURNACE LINDBERG 830A12B7D1FP BELT FURNACE

  1. Max temp is 1100°C

  2. Belt width is 12”

  3. Maximum load height is 1.5” at full belt width,
    2” max height at the center half of the belt width,
    see hot zone image attached

  4. Heated length is 72” with 7 zones of control

  5. Cooling length is 36”

  6. Overall cabinet width is 40”

  7. Overall length is 20’

  8. Maximum cabinet height is 74” at control cabinet

  9. Cabinet height at heated section is 55”

  10. Furnace has full length Inconel Muffle.

  11. The gas safety system for explosive atmosphere is not functional,
    it is currently being used for nonexplosive H2/N2 mix
    for cusil (AgCu) brazing.

  12.  Inconel Belt

  13. This Furnace is currently being used daily at 830°C, occasionally at 1050°C.

  14. This furnace is a good candidate for an upgrade to modern temp controllers,
    otherwise it is ready for years of additional use.

LINDBERG 830A12B7D1FP BELT FURNACE

KARENMADISON.COM
619.985.9390
madison@karenmadison.com

 

MADE IN USA!