FURNACES, FURNACES, FURNACES !!!
Furnace Group USA
Moly – Pusher Furnaces, Co-Fire Furnaces,
Reflow Furnaces, High Temp Belt Furnaces
Diffusion Furnaces, Elevator Hearth Furnaces,
Vacuum Furnaces, Tube Furnaces. . .
and the list goes on!
These Furnaces are used for Heat Treating –
and other Thermal Processing applications
We are totally focused on providing you
with the highest quality equipment,
both reconditioned and *as-is*.
INCLUDING PARTS FOR MOST FURNACES!
Also Wafer Fabrication and Manufacturing equipment as well!
We know how important it is for you to make
the right investment decisions and we understand
that the purchase of a piece of new equipment
is not always feasible with tight operating budgets or timelines.
Purchasing preowned – reconditioned equipment allows
for savings of at least 60% of new,
while providing typically the same quality and performance.
If you are not ready to buy new, choose
the very best alternative to ensure quality
and performance: a reconditioned system
Every system we supply undergoes
a stringent series of checks – if it’s not sold *as-is*
These procedures are carried out
by our qualified team of engineers
and technicians working to the most
Upon purchase, and after an initial inspection,
each machine to be sold functional is cleaned,
reconditioned as required and tested to ensure
that manufacturer’s specifications are met.
Whenever any parts are replaced,
only factory approved parts are used.
The result of this process is a high-quality machine
that will provide you with years of service.
Our Reconditioning Process:
Replacement, Rebuilding or Refurbishment
of components and assemblies, as appropriate.
Housings and covers reworked and / or painted, as appropriate
Thorough detail cleaning of complete system.
In our Furnace reconditioning –
replacement of worn mechanical parts
with good or rebuilt parts.
Functional testing to factory specifications on Furnaces
per recommended diagnostics and procedures.
Full functional testing of Furnaces unless purchased *as-is*.
Quality Control and Shipping:
Final functional testing of all Semiconductor Equipment
with documented (video/pictures).
Systems are made ready for packing/crating
(all assemblies locked down and secured).
Systems packed: All components bubble –
stretch-wrapped individually. Professional crating of system.
Each crate generally includes a floating base, tip-n-tell devices,
and shock-watch devices inside and outside of crate.
ISPM–15 standard, all solid wood and wood packaging materials (WPM)
over 6 mm in thickness used for export such as wooden pallets,
dunnage and crating is treated. . .
Equipment is vacuum barrier bagged for International shipments.
Shipping arrangements made with an approved shipping company
and for smaller items and the best priced and insured
*Air Ride* carrier for larger items.
Or, we can use your carrier of choice and bill your account!
Our International shipments are handled thru
various freight forwarders to be most cost effective for our customers.
Shipping documentation provided;
Shipment confirmation email sent with applicable tracking info.
All shipments are fully insured.
How we package what we sell:
We take all measures to ensure our equipment
is professionally packed, and/or crated, and shipped as carefully
as possible to ensure safe delivery to your facility.
Our crates are professionally built
and our craters use ISPM-15 Certified Wood
for all International shipments.
All systems are crated onsite
where we can supervise all phases of the crating process.
Equipment being shipped Internationally
is vapor barrier bagged (vacuum sealed)
for added protection.
All equipment is shipped via air-ride truck
(air freight for smaller international shipments).
All systems are fully insured throughout transit.
We’re also continuously looking for Furnaces,
and / or ANY surplus semiconductor equipment to purchase
including *Board Level Components*
From single systems, to complete process lines,
as well as complete fabrication facilities
and total *buyouts of component inventories*
If you are looking to sell off your idle or surplus equipment,
please contact us to discuss the details.
We buy surplus equipment!
Asset Management – * Consignment * – Outright Purchase
Contact us today for our program details!
Our approach is straightforward and efficiently effective.
Upon agreeing to purchase price,
we move quickly towards payment
(in which ever form you choose –
CASH, CHECK, WIRE TRANSFER, EFT)
and immediate pickup of equipment is made
once our payment is approved.
Providing any and all documentation for your records.
Any way you look at it, the credibility of the items listed
and the business ethics that have been established
over the past 27 years plus, as being one of the
leading used equipment dealers for
LTCC, SMT, Wafer Fab et al. equipment
and other requirements of the Industry – remain the same!
Thanks for stopping by!!! . . . Madison