On-Site – YOUTUBE VID:
|Use:||Metalization of Mo-Mn Pasto|
|Type:||Full-Automatic Hydraulic Pusher system|
|Size of Tray||200mm W
|Pusher Speed||Three Tray per Hour|
|Feed Rate||600mm/ hour|
Hydogen / 12%
Nitrogen / 88%
|Temperature||1500 degrees *C*
|Heating Elements||Silicon Carbide Heating Element
|E 25 o
|Molybdenum Heating Element (6 o)|
|The heating elements shall be silicon carbide and temperature control shall be divided into two zones and operate automatically
Temperature control shall be made by the temperature controller and recorded by the temperature recorder.
THe temperature control is subjected to the PID control.
|The Heating Element - Molybdenum - is fitted into the side wall and hearth with the temperature distributed reasonably.
Temperature control is divided into five zones and operated automatically.
Temperature control is made by the temperature controller and recorded by the temperature recorder.
|Cooling Water Chamber|
|The Cooling Water Chamber is made of SUS 304 to be fully endurable for thermal strain, etc.|
|The main pusher is available for quick feed and return switching wit the pusher head which is fitted to the hydraulic cylinder of
100o x 400ST
|Entrance of Pusher|
|Pressing into the furnace with the pusher head which is fitted to the hydraulic cylinder of 63o x 600ST|
|Exit of Pusher|
|Inserting into the outlet replacement chamber with the pusher head which is fitted to the hydraulic cylinder of 63o x 650 ST.
|Taking off the furnace with the pusher head which is fitted to the hydraulic cylinder of 63o x 1000 ST.|
|Return Pusher #1|
|Feeding to the return frame with the pusher head which is fitted to the hydraulic cylinder of 63o x 500 ST.|
|Return Pusher #2|
|Supplying a tray to the entrance with the pusher head which is fitted to the hydraulic cylinder of 63o x 600 ST.|
|Opening and closing with the air cylinder of 80o x 300ST.|
|Conducting opening and closing with the air cylinder of 80o x 260 ST.|
|The driving panel is of the self-standing front door opening type of a size of 1000m W x 1800mm H x 500mm D
In front of the panel is fitted with a graphic plate, lamp, switch, etc. and inside of it with a magnetic switch, relay, timer, transformer, etc.
In addition, the operation stand is fitted with a switch and lamp only.
|The Control Panel is of the self-standing full door type and manufactured with a size of 3800mm W x 1000mm D x 1800mm H|
|The panel is fitted with a voltmeter, amperemeter, temperature controller, temperature recorder, voltage tap changeover handle, switch etc. and on the inside it is fitted with an SCR, transformer, magnet, relar, etc.
The rated capacity, voltage and amperage of each circuit are as follows.
We are not responsible for *typo’s*