SC SERIES SOLAR CELL FURNACES

SCD-609 IR Furnace
SCD-609 IR Furnace Solar Cell with Dryer – SCD

High Production
with Fail-Safe
Forming Gas Operation

We manufacture the fastest and most efficient solar cell production IR furnaces that are now available with user-selectable reducing atmosphere or standard nitrogen operation.

High production yields and throughput are achievable due to the design’s quick start-up and changeover time,
offering precise and repeatable temperature profiles up to 1000 degrees *C*
in a uniform and ultra-clean process gas atmosphere.

Computer Controlled:
The furnace is operated via ProControl software installed
on a robust managed platform RAID1 furnace computer.

The process engineer can easily vary process parameters
using the sophisticated PID
and power control parameters in the software.

An almost infinite number of recipes and profiles can be labeled and stored
for ready access on the furnace computer.

The software includes 2 levels of password protected control (Engineer and Operator)
and logs each change in recipe load or furnace state useful for troubleshooting product
and process performance.

The furnace software operates on a Microsoft Windows 7 Professional computer system.
The program and all settings and recipes are stored on the RAID1 dual mirrored redundant hard drives.

The computer is complete with 17″ LCD 1280×1024 high resolution color graphic screen,
full size keyboard/mouse interface and both Ethernet and wireless SCD-N
high-speed network connections to facilitate view and control of the furnace
by managers and process engineers from any location.

The furnace includes four (4) local USB ports (two at entrance
and two on the LCD monitor at the control panel)
for connecting profilers and jump drive storage devices.

Low cost of ownership results from the furnace versatility, high throughput, quick readiness, and low utility consumption.

Small zones and high temperature differentials enable broad profile flexibility.
Profiles with peak temperatures from 150 degrees C to 1000 degrees C are possible.

The furnace can be turned on, turned off, or re-profiled in minutes, saving time and money. These are the fastest and most efficient production furnaces available for semiconductor packaging. High production yields and throughput are achievable due to the design’s quick start-up and changeover time, precise and repeatable temperature profiles
up to 1000 degrees *C*.

The process gas atmosphere is uniform and ultra-clean.

Furnace Arrangement

Parameter

SCD-300 series

SCD-600 series

Load Station

38 cm
15 inches

38 cm
15 inches

Entrance Isolation Baffle with Venturi Exhaust

38 cm
15 inches

38 cm
15 inches

IR Heating Chamber
Dryer Zone 1

76 cm
30 inches

38 cm
15 inches

IR Heating Chamber
Dryer Zone 2

76 cm
30 inches

38 cm
15 inches

IR Heating Chamber
Dryer Zone 3

none

38 cm
15 inches

Exit Baffle/Dryer Exhaust

38 cm
15 inches

38 cm
15 inches

Open Inspection Area

38 cm
15 inches

38 cm
15 inches

Entrance Baffle
Furnace Exhaust

38 cm
15 inches

38 cm
15 inches

IR Heating Chamber
Furnace Zone 1

19 cm
7.5 inches

38 cm
15 inches

IR Heating Chamber
Furnace Zone 2

19 cm
7.5 inches

38 cm
15 inches

IR Heating Chamber
Furnace Zone 3

19 cm
7.5 inches

19 cm
7.5 inches

IR Heating Chamber
Furnace Zone 4

19 cm
7.5 inches

19 cm
7.5 inches

IR Heating Chamber
Furnace Zone 5

none

19 cm
7.5 inches

IR Heating Chamber
Furnace Zone 6

none

19 cm
7.5 inches

Transition Tunnel
with Venturi Exhaust

13 cm
5 inches

38 cm
15 inches

Water Cooling Section 1

50 cm
20 inches

50 cm
20 inches

Water Cooling
Section 2

none

50 cm
20 inches

Forced Air
Cooling 1

115 cm
45 inches

115 cm
45 inches

Forced Air
Cooling 2

none

115 cm
45 inches

Unload Station

38 cm
15 inches

38 cm
15 inches

Total Furnace Length

643 cm
253 inches

909 cm
358 inches

SC-SERIES SOLAR CELL FURNACE W/DRYER
SC-SERIES SOLAR CELL FURNACE W/DRYER

 

Furnace Specifications for SCD Photovoltaic Models

SPECIFICATIONS

Parameter

SCD-300

SCD-600

Process Gas

CDA, Nitrogen, or Dual Gas with:
1.  Nitrogen (N2)
2.  Forming Gas Anneal

Dryer Control Zones

2 zones

2 zones

Dryer Heating Chamber length

71 cm
30 inches

152 cm
60 inches

Furnace Control Zones

3 zones

6 zones

Furnace Heating Chamber length

71 cm
30 inches

152 cm
60 inches

Cooling Chamber

152-304 cm
60-120 inches
consisting of a mix of these modules, depending on application:

1. CACT – N2 convective and radiant cooling, exterior fan heat removal.

2. CAWC – N2 convective and radiant cooling, cold water heat removal (city or chiller).

Conveyor Belt

BNV- Niobium stabilized Nichrome V wire belt

Product Height

19 mm
0.75 inches
above belt level stand-offs

Vertical
Clearance

1.5 inches over belt

Belt Size
model, width

SCD-309
24 cm
9.5in

SCD-315
38 cm
15in

SCD-324
61 cm
24in

SCD-609
24 cm
9.5in

SCD-615
38 cm
15in

SCD-624
61 cm
24in

Belt Speed

5600 mm/min
220 ipm

Exhaust

Improved venturi exhaust stacks
to reduce process gas consumption.
Number of stacks will vary with process requirements.

Temperature Capacity, max

Dryer: 450 degrees *C*
Furnace:  1000 degrees *C*

Electrical

All models include universal transformers
which accommodate 208-480 Vac and 50/60 Hz frequency
anywhere in the world, allowing furnace relocation
without external equipment.

All furnace systems are phase balanced
to improve facility efficiency. IR lamp controls automatically keep IR spectrum constant.

Made In USA

Peak Power Consumption kW

SCD-309
59 kW

SCD-315
89 kW

SCD-324
149 kW

SCD-609
90 kW

SCD-615
136 kW

SCD-624
229 kW

Operating Power Consumption, kW

SCD-309
23 kW

SCD-315
35 kW

SCD-324
59 kW

SCD-609
36 kW

SCD-615
55 kW

SCD-624
92 kW

Total Furnace Length

643 cm
253 inches

909 cm
358 inches

Furnace Width

SCD-309
24 cm
9.5in

SCD-315
38 cm
15in

SCD-324
61 cm
24in

SCD-609
24 cm
9.5in

SCD-615
38 cm
15in

SCD-624
61 cm
24in

Furnace Height

172 cm
68 inches

Net Weight

SCD-309
1280 kg
2800 Lbs

SCD-315
1450kg
3175 Lbs

SCD-324
1720kg
3800 Lbs

SCD-609
1800 kg
3950 Lbs

SCD-615
2040kg
4500 Lbs

SCD-624
2460kg
5400 Lbs

All standard models (except LA-306 series and “P” models) include a RAID1 computer with LCD  screen, full size keyboard interface
and both Ethernet and wireless-N high-speed network connections to facilitate view
and control of the furnace by managers and process engineers from any location.
Four (4) local USB ports are provided, convenient for connecting a furnace profiler and jump drive storage devices.

The new “P” series replaces the computer control system with high quality discrete digital controllers
for cost-effective precision control on repetitive production applications.
These furnaces are a good solution in applications where process recipes are changed infrequently and auxiliaries are at a minimum.