|
MPM CORPORATION |
||||
|
TF-100 Screen Printer Specifications |
||||
|
Standard Features: |
||||
|
|
|
Precision print head to -
carriage alignment using unique one-print Mylar adjustment system with
X, Y, and theta micrometer adjustments. |
||
|
|
Consistent print uniformity | |||
|
|
All adjustments have independent locks and stay in setup | |||
|
|
User-selectable print cycles: single print mode with flood print/print flood; alternate; and double print modes | |||
|
|
Contact /Off-contact printing capability | |||
|
|
Hydraulic squeegee drive (air-over-oil) with adjustable speed and stroke |
|||
|
|
Squeegee pressure adjusted
by calibrated coil springs |
|||
|
|
Adjustable squeegee down stop and angle of attach | |||
|
|
Choice of fixed or floating squeegee assembly | |||
|
|
No tools required for set-up | |||
|
System Specifications |
|
| Print Area: | 6" x 6" |
| Frame Size: | 5" x 5" up to 12" x 12" inside dimensions |
| Substrate Carriage: |
Registration Repeatability:
±0.0005" Substrate Size: 6" x 6" X-Y Adjustment: ±0.500" range (micrometer) Rotary Adjustment: ±10" (micrometer) |
| Squeegee Head: |
Print Stroke Adjustment: 1" to 9" Speed: 0 to 15" per second Screen Height Adjustment: 1" range (dial indicator) Pressure: 2-30lbs by calibrated coil springs Angle of Attack Adjustment: ±5" Squeegee Holder: 7.5" maximum (specify) with .0375" square blade |
| Service: |
Power: 115V, 60Hz (220V, 50Hz), 1 amp Air: 80 - 125 psig @ 6cfm Vacuum: 23 Hg @ 4cfm |
| Dimensions: |
Printer Length: 42" Width: 16" Height:17"
Formica Covered Table Steel Stand Shipping Weight |