12481.....Radoll #35 Bevelmate Beveller
- BevelMate will bevel boards as small as 1" square;
boards up to 24" long(*);
boards with up to 1" recessed fingers x .070" deep. It will also
bevel conventional boards.
- Will bevel assembled boards individually or in panel form.
- This high production machine features automatic board
thickness compensation
and double-sided beveling.
- Production cycle time of 3 to 7 seconds. (Board size and
operator dexterity are factors.)
- Simple operation and easy 3 step set-up.
- Bevel angle: 180o (Flat edge) to 15o
per side plus edge polish.
Angle is altered by exchanging cutter block.
- * (Standard machine handles boards up to 18",
custom machine - up to 24").
|
BevelMate
Specifications |
|
Compressed
Air: |
Up
to 3 CFM shop's air at 100 psi |
|
Dust
Collector: |
Shop's
Vac to collect gold-plated shavings |
|
Noise
Level: |
Less
than 70 decibels |
|
Cutters: |
5,000
to 7,000 feet between sharpening |
|
Shipping
Weight: |
175
lbs |
|
Dimensions: |
14"
x 48" x 11" |
Left click on any of the above *Thumbnails* to view a larger version.
Use the ICON to return to
our main page.
Thanks for your interest !!!